- Reusable low VSWR edge launch
- Narrow profile saves PCB space
- Coverage up to 40, 50, 67 and 110 GHz
High Speed End Launch Connectors
- Reusable low VSWR edge launch
- Narrow profile saves PCB space
- Coverage up to 40, 50, 67 and 110 GHz
- Solder or solder-less end launch installation
- Supports 28 Gbps SerDes
Click on a product below for more details
Typical Performance Data
 |
|
| 2.92mm Jack PCB Connector End Launch Solder/Solder (Captive Contact) Attachment Removable End Launch, 0.35 Width | |
Click to open: |
|
 |
|
| 2.4mm Jack PCB Connector End Launch Solder/Solder (Captive Contact) Attachment Removable End Launch, 0.35 Width | |
Click to open: |
|
 |
|
| 1.85mm Jack PCB Connector End Launch Solder/Solder (Captive Contact) Attachment Removable End Launch, 0.35 Width | |
Click to open: |
|
 |
|
| 1.0mm Jack PCB Connector End Launch Solder/Solder (Captive Contact) Attachment Removable End Launch, 0.35 Width | |
Click to open: |
|
High Speed End Launch Connectors from Fairview Microwave
Fairview Microwave’s high-speed end launch connectors are comprised of four models that provide VSWR as low as 1.10:1 and a maximum operating frequency of 40 to 110 GHz, depending on the model.
These end launch connectors are reusable, don’t require any soldering and have a compact profile with a 0.350-inch mounting width and a 0.005-inch launch pin. They feature an outer conductor made of stainless steel and a gold-plated beryllium copper center contact.
These end launch connectors are ideally suited for high-speed digital and mmWave system development and are in stock and available for same day shipping.
Click here to view our entire line of RF products
Fairview Microwave, Inc.
301 Leora Ln., Suite 100
Lewisville, TX 75056
Office Hours: Monday – Friday, 7am - 6pm
Telephone: (800) 715-4396 / (972) 649-6678
Fax: (972) 649-6689