TAPPERS
Tappers are commonly used for in building applications. basically they're an uneven power divider. Some terminology is unique to tappers; the "db" value is a ratio of the 2 output signals, as opposed to a coupling value.. If a tapper has 10watts into it, 2.5 watts out of one port, & 7.5 watts out of the other port, this is a 3:1 split, & is a 4.7db tapper--which could also be realized by a 6db coupler
 |
 |
|||||||||
| SMT2500 $130.00 | SMT2700 $140.00 | |||||||||
| 800-2500MHZ "TAPPER" | 380-2700MHZ 'TAPPER" | |||||||||
| STOCK: | STOCK: | |||||||||
| 3DB | 2:1 | 3 | 5DB | 3:1 | 2 | |||||
| 5DB | 3:1 | 10DB | 10:1 | 3 | ||||||
| 6DB | 4:1 | 3 | 15DB | 30:1 | 3 | |||||
| 8DB | 6:1 | 4 | ||||||||
| 10DB | 10:1 | |||||||||
| 13DB | 20:1 | 3 | ||||||||
| 15DB | 30:1 | |||||||||
| DATASHEET: smt2500.pdf | DATASHEET: smt2700.pdf | |||||||||